How to Replace a Saab 9-3 Key
The Saab 9-3 is a great car that has a lot of appeal for drivers. It has a powerful engine and good visibility. It has a very high safety rating.
However, it's important to make sure that you have two working keys for your car. If you lose one key, it could be costly to purchase the new one.
How to replace the ignition Key on the Saab 9-3
You'll have to replace your car key in case it isn't turning. This guide will walk you through how to do it on the Saab 9-3. You'll need to replace the key, purchase another reprogrammable device, and then purchase a new casing for your key-fob.
Contrary to earlier models, modern Saab cars have transponders in the key-fob rather than a physical key to unlock and start the vehicle. The problem with this is that the reprogrammable battery on the key-fob can wear out and not hold a charge any longer. This is particularly true if you keep using the same key for the same lock.
A professional locksmith can change the battery quickly. You can also do it yourself if you have the appropriate tools and a bit of patience. The first step is taking the key-fob off. This is accomplished by inserting a flathead screwdriver into the slot located in the middle of the case. It is essential to take your time, as the plastic is very thin and can easily be damaged.
When the case is opened and you are able to prepare the new key by combining the lower portion of the previous key with the transponder and banana on the new key. This will ensure the new key is properly connected to your CIM, which can make a significant difference when replacing the sole key for your Saab 9-3.
How to replace the ignition Key on a Saab 900
If you don't have two keys, you will need to remove the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can remove the trim and dashboard pieces around the steering wheel. Once the dash is removed, you can place a screwdriver in the opening behind the ignition switch.
The ignition cylinder is fitted with a lock for keys that can prevent the vehicle from starting if it doesn't have a key. If the ignition switch isn't working properly, check to see whether the key is in the lock or snared inside the ignition barrel. It's also recommended to rotate your keys regularly and keep them clean so that one doesn't get bent.
Saab cars are different from other vehicles in that they don't use traditional keys made of metal. The car instead recognizes the electric signals from the key fob using the use of a specific microchip.
If you lose only one working key fob the dealer will charge you the highest dollar to replace the computer module (known as the CIM). We can reprogram the EEPROM on your existing computer and allow it to accept new keys without having to replace it. saab key fob programming www.g28carkeys.co.uk can save you over 50% of what the dealer charges! We call it the SAAB Key PROGRAM. Find out more about it here!
How to replace the ignition Key on a Saab 9-5
The metal part of the classic Saab keys is simple to duplicate and does not represent a significant risk to theft of vehicles. The real protection comes from the electronic part of the key-fob, which has a chip inside that recognizes your car when it's inserted into the ignition switch.
Saab has relied on the technology of this anti-theft system for more than a decade. It's not as effective as a physical lock for your door, but it makes stealing your car a lot harder. This is the reason why every Saab owner should keep an extra key available.
The majority of new Saabs come with two keys right from the factory, but you can upgrade them at a dealer through a special handheld computer referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, which have modern, more advanced features that require a separate key-fob and work through a different process.
The dealer will replace the CIM or TWICE module of those cars if all keys are lost. They'll cost you top dollar for the process. However, we can reprogram the EEPROM on your computer and make it accept new keys, without replacing the expensive modules.
How do I replace the ignition Key in an XC90 Saab
It may be time to replace your SAAB key fob if it's having trouble turning the lock barrel. The procedure is quite simple and you don't need to visit a dealership. You can complete the process at home with just a few basic tools.
It is first necessary to prepare the new keys. Before starting, make sure that the anti-theft system has been disabled by placing blocks on the rear wheels and releasing the handbrake. Insert the key in the ignition, and then turn it to the "on" position. This will activate the accessories but will not start the engine. Repeat this five times, and then leave the key on the "on" position.
You'll then have to buy an additional case for your key fob. They can be found at a variety of auto parts stores and are typically inexpensive. Depending on the model, you may even buy them without electronic components.
To open up the case, place a flathead screwdriver in the slot in the middle, and gently work it. The case will split easily and, once you do, you'll have access to the internal electronics. Use a flathead screwdriver to gently pull out the electronic components.